HP M1522nf - LaserJet MFP B/W Laser - Site Preparations

Site preparations
Operating environment
Place the product on a sturdy, level surface in a well-ventilated area. Make sure that the air vents are
not blocked and that the product is installed away from direct sunlight, open flames, and ammonia fumes.
Figure 2-1 Operating environment
7
00 mm (27.
5 inc
hes)
595 m
m
(
23.5 in
c
he
s)
79
0 m
m
(
31
.
0
in
c
h
e
s)
Store or install the product in an area that meets the following requirements:
●
Temperature (printer; operating) 15
o
to 32.5
o
C (59
o
to 90.5
o
F)
●
Temperature (printer; storage) -20
o
to 60
o
C (-4
o
to 140
o
F)
●
Humidity (printer; operating) 10 to 80% relative humidity (no condensation)
●
Humidity (printer; storage) 10% to 90% relative humidity (no condensation)
●
Temperature (toner cartridge; storage) -20
o
to 40
o
C (-4 to 104
o
F)
●
Humidity (toner cartridge; storage) 10% to 90% relative humidity (no condensation)
16 Chapter 2 Installation ENWW