HP M1522nf - LaserJet MFP B/W Laser - Engine Control System

Page description How to print the page
Menu map
Shows the control-panel menus and available settings.
1.
On the product control panel, press Setup
.
2. Use the arrow buttons to select Reports, and then press
OK.
3. Use the arrow buttons to select Menu structure, and then
press OK.
Network report
Shows the product network settings.
1.
On the product control panel, press Setup
.
2. Use the arrow buttons to select Reports, and then press
OK.
3. Use the arrow buttons button to select Network report,
and then press OK.
Fax reports 1.
On the product control panel, press Setup
.
2. Use the arrow buttons to select Reports, and then press
OK.
3. Use the arrow buttons button to select Fax reports, and
then press OK.
4. Use the arrow buttons button to select the report that you
want to print, and then press OK.
HP ToolboxFX
HP ToolboxFX is a program that you can use to complete the following tasks:
●
Check the product status.
●
Configure the product settings.
●
View troubleshooting information.
●
View online documentation.
You can view HP ToolboxFX when the product is directly connected to a computer or when it is
connected to the network. You must perform the recommended full software installation to use
HP ToolboxFX.
View HP ToolboxFX
Open HP ToolboxFX in one of these ways:
●
In the Windows system tray or on your desktop, double-click the HP ToolboxFX icon.
●
On the Windows Start menu, click Programs (or All Programs in Windows XP), click HP, click
HP LaserJet M1522, and then click HP ToolboxFX.
ENWW Management tools 37