HP M1522nf - LaserJet MFP B/W Laser - Separation Pad (Product Base)

4. Lift up on the retainer-clip locking tab, and pull the clip down and away from the flatbed lid. Repeat
this step for the hinge-retainer clip at the other end of the flatbed.
Figure 5-9 Remove the flatbed lid (4 of 5)
5. Raise the flatbed scanner lid until the hinges can clear the hinge posts on the scanner bed, and
then remove the flatbed lid from the scanner assembly.
CAUTION: Avoid touching the flatbed glass or the ADF separation pad. Skin oils and fingerprints
can contaminate the glass or pad and cause print-quality problems.
Figure 5-10 Remove the flatbed lid (5 of 5)
78 Chapter 5 Removal and replacement ENWW