HP M1530

3. Use the arrow buttons to select the ID Copy
item, and then press the OK button.
4. When prompted by the control panel display,
turn the document over, place it on a different
portion of the scanner glass, and then press the
OK button.
5. When prompted by the control panel display,
press the Start Copy
button.
Cancel a copy job
1. Press the Cancel button on the product control panel.
NOTE: If more than one process is running, pressing the Cancel button clears the current
process and all pending processes.
2. Remove the remaining pages from the document feeder.
3. Press the OK button to eject the remaining pages from the document-feeder paper path.
Reduce or enlarge a copy image
1. Load the document onto the scanner glass or
into the document feeder.
2. Locate the Reduce/Enlarge button.
3. Press the Reduce/Enlarge button repeatedly
to display the correct size, and then press the
OK button.
4. Press the Start Copy
button to start
copying.
90 Chapter 8 Copy ENWW