2. Adjust the paper guides until they are snug
against the paper.
3. On the product control panel, use the keypad to
enter the fax number.
4.
Press the Start Fax
button. The product starts
the fax job.
1. Insert the originals into the document feeder
face-up.
CAUTION: To prevent damage to the product,
do not use an original that contains correction
tape, correction fluid, paper clips, or staples.
Also, do not load photographs, small originals, or
fragile originals into the document feeder.
2. Adjust the paper guides until they are snug
against the paper.
3. From the Home screen on the product control
panel, touch the Fax button.
4. Use the keypad to enter the fax number.
5. Touch the Start Fax button.
ENWW Send a fax 71
To Next Page
Loading...