EasyManua.ls Logo

HP M3035 - LaserJet MFP B/W Laser - Troubleshoot print-quality problems

HP M3035 - LaserJet MFP B/W Laser
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
the Other Links area on the left side of the window. To visit this or any Web site, you must have
Internet access.
Event log. Shows a list of all device events and errors.
Usage page. Shows a summary of the number of pages the device has printed, grouped by size
and type (this page is only available if an optional hard disk is installed).
Device Information. Shows the device network name, address, and model information. To change
these entries, click Device Information on the Settings tab.
Settings tab
Use the Settings tab to configure the device from your computer. The Settings tab can be password
protected. If the device is on a network, always consult with the network administrator before changing
settings on this tab.
The Settings tab contains the following pages.
Configure Device. Use this page to configure all of the device settings. This page contains the
traditional device menus: Information, Paper Handling, Configure Device, and Diagnostics.
Alerts. (On networks only.) Use this page to establish e-mail alerts for various device and supplies
events.
E-mail. (On networks only.) Use this page in conjunction with the Alerts page to set up incoming
and outgoing e-mail, as well as to establish e-mail alerts.
Security. Use this page to set a password that must be typed to gain access to the Settings
and Networking tabs. Also use it to enable and disable certain features of the
embedded Web server.
Other Links. Use this page to add or customize a link to another Web site. The link you establish
appears in the Other Links area on all embedded Web server pages. The following permanent
links always appear in the Other Links area: HP Instant Support, Order Supplies, and Product
Support.
Device Information. Use this page to name the device and assign an asset number to it. Use the
name and e-mail address for the primary contact who will receive information about the device.
Language. Use this page to specify the language in which the embedded Web server information
appears.
Networking tab
The network administrator uses this tab to control network-related settings for the device when it is
connected to an IP-based network. This tab does not appear if the device is directly connected to a
computer, or if the device is connected to a network with anything other than an HP Jetdirect print server.
Other links
This section of the embedded Web server contains links that connect you to the Internet. You must have
Internet access in order to use any of these links. If you use a dial-up connection and did not connect
236 Chapter 6 Troubleshooting ENWW

Related product manuals