Scattered lines
1. Make sure that the type and quality of the media that you are using meet HP specifications.
(See
Media specifications on page 15.)
2. Make sure that the environmental specifications for the device are being met. (See
Operating
environment on page 22.)
3. Turn over the stack of media in the tray. Also, try rotating the stack 180°.
4. Open the Print Quality menu at the device control panel. Open the Toner Density submenu and
change the toner density setting. See the user guide.
5. Open the Print Quality menu at the device control panel. Open the Optimize submenu and set Line
Detail to On. See the user guide.
Blurred print
1. Make sure that the type and quality of the media that you are using meet HP specifications.
(See
Media specifications on page 15.)
2. Make sure that the environmental specifications for the device are being met. (See Operating
environment on page 22.)
3. Turn over the stack of media in the tray. Also, try rotating the stack 180°.
4. Do not use paper that already has been run through the device.
5. Open the Print Quality menu at the device control panel. Open the Toner Density submenu and
decrease the toner density setting. See the user guide.
6. Open the Print Quality menu at the device control panel. Open the Optimize submenu and set High
Transfer to Increased. See the user guide.
ENWW Troubleshoot print-quality problems 259
To Next Page
Loading...