HP M3035 - LaserJet MFP B/W Laser - Page 71

Formatter
The formatter is responsible for the following actions:
●
Controlling the ADF/scanner assembly
●
Formatting and controlling copies
●
Receiving and processing print data from the computer interface
●
Monitoring the control panel and relaying device status information
●
Developing and coordinating data placement and timing with the print engine
Figure 4-4 Formatter connections on page 59 shows the formatter connections.
5
6
4
3
2
1 13
12
11
10
9
8
7
Figure 4-4 Formatter connections
1 Disk drive power 8 Network port
2 Disk drive interface 9 FIH port
3 ECU power 10 Type A Hi-Speed USB 2.0 connection for adding
accessories
4 ECU interface
5 ADF/scanner interface 11 Type B Hi-Speed USB 2.0 port
6 Control panel interface 12 DIMM slot
7 Fax accessory interface 13 EIO connection
ENWW Basic operation 59