EasyManua.ls Logo

HP M830z

HP M830z
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Select the tray to use for the copy
1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the Paper Selection button.
3. Select the tray that holds the paper that you want to use, and then touch the OK button.
Check the image-adjustment settings
Adjust these additional settings to improve copy quality.
1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the Image Adjustment button.
3. Adjust the sliders to set the Darkness level, the Contrast level, the Sharpness level, and the Background
Cleanup level. Touch the OK button.
4. Touch the Start
button.
Optimize copy quality for text or pictures
Optimize the copy job for the type of image being copied: text, graphics, or photos.
1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the More Options button, and then touch the Optimize Text/Picture button.
3. Select one of the predefined options, or touch the Manually adjust button, and then adjust the slider in
the Optimize For area. Touch the OK button.
4. Touch the Start
button.
NOTE: These settings are temporary. After you have finished the job, the product returns to the default
settings.
Edge-to-edge copying
Use this feature to avoid shadows that can appear along the edges of copies when the original document is
printed close to the edges.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
Copy Settings
Edge-To-Edge
3. Select the Edge-To-Edge output option if the original document is printed close to the paper edges.
4. Touch the Save button.
5. Touch the Start
button.
ENWW Improve copy image quality 167

Other manuals for HP M830z

Related product manuals