HP ML110

Component identification 8
Item Description Status
1
System health LED Green = Normal
Amber = System degraded
Red = System critical
2
NIC 1 link/activity LED Green = Network link
Flashing green = Network link and activity
Off = No link to network (If the power is off, view the rear panel NIC
LEDs for status.)
3
Hard drive activity LED Flashing green = Drive active
Off = No drive activity
4
System power button/LED Green = System on
Amber = System in standby, but power is still applied
Off = Power cord not attached or power supply failed
5
Power status LED Green = System on
Amber = System in standby, but power is still applied
Off = Power cord not attached or power supply failed
6
NIC 2 link/activity LED Green = Network link
Flashing green = Network link and activity
Off = No link to network (If the power is off, view the rear panel NIC
LEDs for status.)
7
UID button/LED Blue = Activated
Flashing blue = System being remotely managed
Off = Deactivated
8
Optical drive activity LED Flashing green = Drive active
Off = No drive activity
Rear panel components
Item Description
1
Kensington lock notch
2
Power supply connector
3
PCIe slot cover retainer latch