Front view
1 Media width guide – Adjusts to accommodate different media sizes.
2 Input tray – Holds the media. Remove media and close this tray when the printer is not
in use.
NOTE: If you are loading larger-size media, pull to extend the tray.
3 Narrow media guide – When sliding the media width guide to the right and against
narrow or small media, this guide automatically slides to the left slightly.
4 Front access cover – Provides access to the ink cartridges and for clearing paper jams.
This cover must be closed before printing can begin.
5 Output slot – Media exits the printer here.
6 Output door – Covers the output slot when the printer is not in use. Drops open
automatically when printer is turned on.
Back and side view
Understand the printer parts 9
To Next Page
Loading...