Load envelopes
To load envelopes
Use these instructions to load envelopes.
1. Lift the output tray.
2. Slide the paper width guide out as far as possible.
3. Insert the envelopes print-side down and load according to the graphic. Make sure
the stack of envelopes does not exceed the line marking in the tray.
NOTE: Do not load paper envelopes while the printer is printing.
4. Slide the media guides in the tray to adjust them for the envelope size that you
have loaded.
5. Lower the output tray.
6. Pull out the tray extender.
Load cards and photo paper
To load cards and photo paper
Use these instructions to load cards and photo paper.
1. Lift the output tray.
2. Slide the paper width guide out as far as possible.
Load media 15
To Next Page
Loading...
