Light description/Light pattern Explanation and
recommended action
to the Internet, make sure
the proxy settings you are
entering are valid. For
more information, see the
getting started guide
provided with the printer or
check with the IT
administrator or person
who set up your network.
Press the
(HP ePrint)
button to try connecting
again.
◦
If the printer can
connect, the HP ePrint
light turns on, and the
printer prints an
information page.
◦
If the printer still
cannot connect, the
HP ePrint light blinks
and then turns off, and
the printer prints an
information page.
•
HP ePrint has been set up
but has been turned off
because the printer has not
been updated.
If a mandatory update for
the printer is available but
has not been installed, HP
ePrint is turned off. After
the update has been
installed, HP ePrint turns
on automatically.
For more information about
installing the printer
update, press the
(HP
ePrint) button.
The HP ePrint light is on.
HP ePrint is turned on.
If you press the
(HP
ePrint) button once, the printer
prints an information page that
includes the email address you
will use for printing documents
using HP ePrint.
To turn off HP ePrint, press
and hold the
(HP ePrint)
button. The light blinks for five
seconds before turning off.
Chapter 5
(continued)
78 Solve a problem
To Next Page
Loading...
