Set up and use fax10
Send a fax
You can send faxes in a variety of ways. Using the printer’s
control panel, you can send black-and-white or color faxes.
You can also send faxes manually from an attached phone,
which allows you to speak with the recipient before sending
the fax.
You can also send documents on your computer as faxes,
without printing them rst.
Use fax
In this section, you will learn how to send and receive faxes.
Learn more!
See the user guide for more information about the
following topics:
•
Send a fax using monitor dialing
•
Send a fax from a computer
•
Send a fax from memory
•
Schedule a fax to send later
•
Send a fax to multiple recipients
•
Send a fax in Error Correction Mode
The user guide is available on your computer after you
install the software.
Send a standard fax
1. Load the document you want to fax in the printer.
You can fax either from the automatic document feeder (ADF)
or from the scanner glass.
2. Touch Fax.
3. Enter the fax number by using the keypad.
Tip: To add a pause in the fax number you are
entering, touch *@ repeatedly, until a dash (-)
appears on the display.
4. Touch Start Black or Start Color.
Tip: If the recipient reports issues with the quality of
the fax you sent, you can try changing the resolution
or contrast or your fax.
To Next Page
Loading...