HP Officejet 6500A - Plus e-All-in-One Printer - Install Printer Software; Test Wireless Connection

English
Set up wireless (802.11) communication (some models only) 15
Windows
1. Save any open documents. Close any applications that
are running on your computer.
2. Place the HP software CD into the computer.
Step 2: Install software for your printer
Follow the instructions for your operating system.
3. Select Network (Ethernet/Wireless), and then follow the
onscreen instructions.
Note: If the rewall software on your computer displays
any messages during the installation, select the “always
permit/allow” option in the messages. Selecting this
option allows the software to install successfully on your
computer.
Mac OS
1. Place the HP software CD into the computer. 2. Double-click the HP Installer icon on the software CD,
and then follow the onscreen instructions.
Step 3: Test the wireless connection
Print the wireless test page for information about the
printer’s wireless connection. The wireless test page provides
information about the printer’s status, MAC address, and
IP address. If the printer is connected to a network, the test
page displays details about the network settings.
1. Touch right arrow , and then touch Network.
2. Touch Wireless, and then touch Wireless Network Test.