Load media
This section provides instructions for loading media into the printer.
This section contains the following topics:
•
Load standard-size media
•
Load envelopes
•
Load cards and photo paper
•
Load custom-size media
Load standard-size media
To load standard-size media
Use these instructions to load standard media.
1. Lift the output tray.
2. Slide the paper width guide out as far as possible.
3. Insert the media print-side down in the tray. Make sure the stack of media is
inserted as far inside the printer as possible and does not exceed the line marking
in the tray.
NOTE: Do not load paper while the printer is printing.
4. Slide the media guides in the tray until they touch the edge of the stack of media.
5. Lower the output tray.
6. Pull out the tray extender.
Load media 21
To Next Page
Loading...
