2. Insert the media print-side down in the center of the tray. Make sure the stack of
media aligns with the line on the width guide, and is not higher than the paper stack
line on the guide.
NOTE: Do not load paper while the printer is printing.
3. Slide the media guides in the tray to adjust them for the media size that you have
loaded, and then reinsert the tray.
4. Pull out the extension on the output tray.
Load envelopes
To load envelopes
Use these instructions to load an envelope.
1. Pull out Tray 1.
Load media 15
To Next Page
Loading...
