Duplex module
1. Open the left door.
Figure 1-14 Remove the duplex module (1 of 2)
2. Pull the duplex module out of the product.
Figure 1-15 Remove the duplex module (2 of 2)
NOTE: When removing the duplex module, avoid making direct contact with the black cylinder
to prevent ink smear on skin or clothes. Keep the duplex module level to avoid spilling any
maintenance ink.
When removing the duplex module, do not let the bottom of the duplex module touch or rest on
the ribs on the left door, which will damage them and might lead to paper damage and jams.
12 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
