Need help?Do you have a question about the HP OMEN 25i and is the answer not in the manual?
General| Package weight | 7800 g |
|---|---|
| Pixel pitch | 0.2832 x 0.2802 mm |
| Screen shape | Flat |
| Display diagonal | 24.5 \ |
| Surface hardness | 3H |
| Anti-glare screen | Yes |
| Display technology | - |
| Native aspect ratio | 16:9 |
| Horizontal scan range | 31 - 192 kHz |
| Contrast ratio (dynamic) | 12000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Display brightness (typical) | 400 cd/m² |
| Supported graphics resolutions | 640 x 480 (VGA), 720 x 400, 720 x 480, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080) |
| HP segment | Home |
| Product color | Black |
| Market positioning | Gaming |
| USB hub version | 3.2 Gen 1 (3.1 Gen 1) |
| DisplayPort version | 1.4 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 25 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Tilt angle range | -5 - 20 ° |
| Panel mounting interface | 100 x 100 mm |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 233.1 mm |
|---|---|
| Height (with stand) | 389.4 mm |
| Weight (with stand) | 5300 g |
| Depth (without stand) | 92.3 mm |
| Width (without stand) | 557.5 mm |
| Height (without stand) | 333 mm |
Essential safety guidelines for service personnel to prevent injury and equipment damage.
Key precautions for professional repair, including ESD safety and soldering practices.
Overview of the monitor's capabilities, including display technology and connectivity options.
Identification and function of ports and controls located on the rear of the monitor.
Instructions on how to find the product's serial and part numbers for support purposes.
Information on obtaining spare parts, including part numbers and distributor contacts.
Steps and equipment required before disassembling the monitor for service.
Procedure for safely removing the RC component from the monitor.
Detailed steps for repairing or replacing specific connectors like HDMI, DisplayPort, and audio.
Procedure for repairing the audio connector (AP2) on the main board.
Steps for repairing the HDMI connector (P200) on the main board.
Steps for repairing the DisplayPort connector (P300) on the main board.
Guide to testing monitor functions after repair to ensure proper operation.
Table listing common issues, their causes, and recommended solutions for troubleshooting.
To Next Page
