3. Remove light-pipe (callout 1) and button (callout 2).
NOTE: The button (callout 2) is only present on the HP LaserJet P1006/P1008 and does not
need to be removed from the HP LaserJet P1005/P1007.
Figure 4-2 Remove control panel (1 of 1)
Side Covers
1. Remove the front cover. See Front Cover on page 40.
2. Remove the control panel. See
Control panel on page 40.
3. Remove two screws (callout 1).
Figure 4-3 Remove side covers (1 of 4)
ENWW Covers 41
To Next Page
Loading...