Formatter
1. Remove the front cover. See Front Cover on page 40.
2. Remove the control panel. See
Control panel on page 40.
3. Remove the left side cover. See
Side Covers on page 41.
4. Remove four screws (callout 1) and unplug the cable (callout 2).
Figure 4-10 Remove formatter (1 of 2)
5. Remove the formatter board.
Figure 4-11 Remove formatter (2 of 2)
NOTE: When reinstalling the formatter board, place the board on the support bracket first and
align holes before attaching it with the screws.
46 Chapter 4 Removal and replacement ENWW
To Next Page
Loading...