HP LaserJet P1000 Series light status State of the device Action
Ready
The device is ready with no job activity.
To print a Configuration page, press and
release the Go button (HP LaserJet
P1500 network models only).
Processing Data
The device is processing or receiving
data.
To cancel the current job, press the
Cancel button (HP LaserJet P1006/
P1008/P1500 Series only).
Manual Feed or Continuable Error
This state occurs in the following
circumstances:
●
Manual feed
●
General continuable error
To recover from the error and print the
available data, press the Go button
(HP LaserJet P1500 Series only).
If the recovery is successful, the device
continues to the Processing Data state
and completes the job.
If the recovery is unsuccessful, the
device continues to the Continuable
Error state. Try removing any media from
the media path and cycling the device
power.
Attention
●
Print-cartridge door is open
●
Paper jam
●
No cartridge installed
●
Paper out
Close the print-cartridge door, remove
the paper jam, install the cartridge, or
add paper.
Fatal Error
The device has encountered a non-
recoverable error.
●
Turn off the device, wait 10
seconds, and turn on the device.
●
If you cannot resolve the problem,
see
Contact HP support
on page 70.
Table 5-2 Control-panel light messages (continued)
72 Chapter 5 Problem solving ENWW
To Next Page
Loading...