Load media
The following sections describe how to load media into the different input trays.
CAUTION If you try to print on media that is wrinkled, folded, or damaged in any way, a jam
might occur.
Tray 1
Tray 1 is accessed from the front of the printer. The printer prints from tray 1 before attempting to
print from other trays.
Tray 1 holds up to fifty sheets of 75 g/m
2
(20 lb) media or ten envelopes, ten transparencies, or ten
cards. You can use tray 1 to print the first page on media different from the remainder of the
document.
Media guides ensure that the media is correctly fed into the printer and that the print is not skewed
(crooked on the media). When loading media, adjust the media guides to match the width of the
media that you are using.
ENWW Load media 13
To Next Page
Loading...