Site preparation
Place the printer on a sturdy, level surface that meets the following environmental requirements:
●
Temperature: 15°C to 32.5°C (59°F to 90.5°F)
●
Humidity: 10% to 80% relative humidity (no condensation)
●
Exposure: Place away from direct sunlight, open flames, ammonia fumes, and air vents.
●
Clearance: Allow sufficient space around the printer for access.
●
Ventilation: Ensure that the printer is located in a well-ventilated area.
18 Chapter 2 Installation ENWW
To Next Page
Loading...