45
Function test
After repair, be sure to confirm that all functions are working.
Support and troubleshooting
The following table lists possible problems, the possible cause or each problem, and the recommended
solutions.
Table 4-1: Function test
Te
Operating description Tool used
correctly on the monitor.
correctly on the monitor.
Audio test Change volume and balance to confirm whether
volume is smooth and loud enough.
Speaker
Test item Operating description Tool used
VGA test Confirm whether image displays and sound plays
Computer or DVD player
HDMI test Confirm whether image displays and sound plays
correctly on the monitor.
Computer or DVD player
DP test Confirm whether image displays and sound plays
Computer or DVD player
Table 4-2: Solving common problems
Problem Possible cause Solution
Screen is blank or
video is flashing.
Power cord is disconnected. Connect the power cord.
Monitor is off. Power the power button.
NOTE: If pressing the Power
button has no effect, press
and hold the power button
for 10 seconds to disable the
Power button lockout
feature.
Video cable is improperly connected. Connect the video cable
properly.
System is in Sleep mode. Press any key on the
keyboard or move the
mouse to exit Sleep mode.
Video card is incompatible. Open the OSD menu and
select the Input Control
menu. Set Auto-
Switch Input
to Off and manually select
the input
To Next Page
Loading...
