Why doesn't my universal remote control find an HP TV code?
If your universal remote control can't find an HP TV code, it's because HP might not be listed in the supported brand codes. In this case, use a Philips TV code. The HP remote control transmits Philips-licensed remote control codes. After programming your universal remote control with a Philips TV code, it can operate your HP TV functions for volume, mute, power, and input source.
Why did my HP PL5060N power suddenly turn off?
If your HP TV suddenly turned off, it could be due to a few reasons. First, check if the sleep timer is set. Next, review the power control settings. Also, the unit’s internal temperature may have increased. If so, remove any objects blocking the vent, or clean the vent.
What to do if my HP PL5060N has no power?
If your HP TV has no power, try these steps: First, press the Power button on the remote control. If the indicator on the TV is still off, press the Power button on the TV itself. Check if the AC cord is disconnected and ensure both ends of the power cord are plugged in. To verify if the outlet is working, plug in a functional lamp or other electrical device into the same outlet as the TV. If you're using a power strip, make sure it is turned on.
How to troubleshoot no sound on my HP TV at power-on?
If you're not hearing sound from your HP TV at power-on, even though there's an image, check the following: Ensure the two speaker wires are correctly connected at both the speaker and the TV. Also, make sure the volume isn't too low by pressing the Volume button. Finally, check if mute is turned on and, if so, press the Mute button or the Volume button.
What to do if there is no picture or a blue screen on HP PL5060N TV with an external device?
If you have no picture or see a blue screen on your HP TV and you're using an external device, try these steps: Press the Source button on the remote control to confirm the correct source is selected. Verify that the external device or PC is powered on. Check to see whether the source component is connected. Check the power management function to see if it is in standby mode. Connect the source to the TV. Operate the external device or PC (move the mouse, or press a key).
Why does the color look strange on my HP PL5060N?
If the color on your HP TV looks strange, faded, or misaligned, try the following: Adjust the picture tone. If the room is too bright, the picture may look dark, so adjust the lighting. Check the input signal setting. If you are watching a component device, make sure the red, blue, and green cables are fully inserted into the proper connectors on both ends.
How to adjust picture size on HP PL5060N?
If your HP TV picture image is too large or too small, press the Aspect button on the remote control to select a different picture image size.
Why is the picture on my HP TV too red, blue, or green?
If your HP TV picture, with a component input source connected, is too red, blue, or green, or has black that is too black or washed out, check to make sure each cable is plugged into the correct color-coded connector on both the TV and the input source connectors. Also, ensure that the cables are plugged in all the way.
What to do if my HP PL5060N TV cannot be operated?
If your HP TV unit cannot be operated, it may be due to external influences such as lightning and static electricity. In this case, try turning the power of the TV on or unplugging the AC cord and replugging it in after 1 or 2 minutes.
How to resolve a poor picture with video signal input on HP PL5060N TV?
If you are getting a poor picture with video signal input on your HP TV, check the following: Improper control setting. Local interference. Cable interconnections. Adjust picture control as needed. Try another location for the TV. Be sure that all connections are secure.
To Next Page
General
