Setting Up
Setting Up 9
3
Insert the screws into the two holes on the back of
the TV and tighten the screws.
4 Attach speakers if you are using them. See
“Attaching and connecting the display speakers”
on page 9.
Setting Up the TV
Set up the TV by attaching and connecting the display
speakers, connecting cables, and connecting the
power cord.
Attaching and connecting the
display speakers
The speakers come detached from the TV. Each
speaker attaches to the side of the display and
connects individually to the TV. The right speaker is
on the right side of the display when it is viewed from
the front.
The TV has a digital audio output or analog audio
output that you can connect to a separate external
amplifier.
To use a separate external amplifier or a stereo system,
refer to “Connecting an external sound system” on
page 16.
1 Position the TV upright on its stand.
2 Place a speaker onto the TV, and insert the four
screws to secure it.
3 Plug the speaker into the TV.
4 Repeat these steps for the other speaker.
CAUTION: Unplug power for the TV and all
connected components before attaching or
connecting speakers.
To Next Page
Loading...
Need help?
General
