HP P3005 - LaserJet B/W Laser Printer - Page 124

Main motor
1. Remove the following components:
●
All covers (see
Covers on page 69)
●
Formatter (see
Formatter on page 80)
●
ECU (see
Engine control unit (ECU) on page 88)
●
Access plate (see
Access plate on page 96).
●
Fuser (see
Fuser on page 83)
●
High-voltage power supply (see
High-voltage power supply on page 97)
●
Paper feed guide assembly (see
Paper feed guide assembly on page 104.
2. Remove three screws (callout 1) from the main motor cover.
1
Figure 5-39 Removing the main motor (1 of 2)
3. Remove the motor cover.
106 Chapter 5 Removal and replacement ENWW