HP P3005 - LaserJet B/W Laser Printer - Page 133

Face-down-roller shaft
1. Remove the following components:
●
Left-side cover (see
Left-side cover on page 70)
●
Back cover (see
Back cover on page 72)
●
Top cover (see
Top cover on page 74)
2. Rotate the bushings (callout 1) at both ends of the face-down-roller shaft so that they point in a
horizontal direction.
1
Figure 5-48 Removing the face-down-roller shaft (1 of 2)
ENWW Face-down-roller shaft 115