Create and use the cleaning page
1. If your device model includes a duplexer, open the rear output bin.
2. Press Menu to open the menus.
3. Use the
button or the button to scroll to CONFIGURE DEVICE, and then press .
4. Use the
button or the button to scroll to PRINT QUALITY, and then press .
5. Use the
button or the button to scroll to CREATE CLEANING PAGE, and then press .
6. Follow the instructions on the cleaning page to complete the cleaning process.
7. If your device model includes a duplexer, close the rear output bin.
ENWW Clean the device 37
To Next Page
Loading...