Tab or section Options
●
Event log: Shows a list of all device events and errors.
●
Usage page: Shows a summary of the number of pages the device has printed,
grouped by size and type.
●
Device Information: Shows the device network name, address, and model
information. To change these entries, click Device Information on the Settings tab.
●
Control Panel: Shows messages from the device control panel, such as Ready
or Sleep mode on.
●
Print: Allows you to send print jobs to the device.
Settings tab
Provides the ability to configure the
device from your computer
●
Configure Device: Allows you to configure device settings. This page contains the
traditional menus found on devices using a control-panel display.
●
E-mail Server: Network only. Used in conjunction with the Alerts page to set up
incoming and outgoing e-mail, as well as to set e-mail alerts.
●
Alerts: Network only. Allows you to set up to receive e-mail alerts for various device
and supplies events.
●
AutoSend: Allows you to configure the device to send automated e-mails regarding
device configuration and supplies to specific e-mail addresses.
●
Security: Allows you to set a password that must be entered to gain access to the
Settings and Networking tabs. Enable and disable certain features of the
embedded Web server.
●
Edit Other Links: Allows you to add or customize a link to another Web site. This
link is displayed in the Other Links area on all embedded Web server pages.
●
Device Information: Allows you to name the device and assign an asset number to
it. Enter the name and e-mail address for the primary contact who will receive
information about the device.
●
Language: Allows you to determine the language in which to display the embedded
Web server information.
●
Date & Time: Allows time synchronization with a network time server.
●
Wake Time: Allows you to set or edit a wake time for the device.
NOTE The Settings tab can be password-protected. If this device is on a
network, always consult with the system administrator before changing settings
on this tab.
42 Chapter 3 Maintenance ENWW
To Next Page
Loading...