Parts removal order
Use the following diagram to determine which parts must be removed before removing other parts.
Back cover
Left side cover
Right side cover
Fuser
I/O cover
Top, right cover
Top cover
Laser/scanner assembly
Front, right cover
Control panel
Fan, right side
ECU
High-voltage power supply
Paper feed guide assembly
Main motor
Main gear assembly
Fuser
Duplex access plate
Figure 5-1 Parts removal diagram
After performing service
●
Reinstall the print cartridge.
●
Reinstall tray 2.
●
Return all media to the trays.
●
Plug in the power cable and turn on the device.
68 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...