2. Pull out the Tray 1 extension.
3. Place envelopes in Tray 1 face-down, with the top of the envelope oriented toward the front of the
printer.
4. Close the paper guides.
To load envelopes into Tray 2
1. Pull the tray out of the product.
2. Stack envelopes face-up, with the top of the envelopes oriented toward the front of the tray.
3. Place the envelopes in the tray and make sure that they are at at all four corners. Close the length and
width paper guides against the loaded media.
ENWW Load media 43
To Next Page
Loading...