2. Remove any visible media.
NOTE: If the sheet tears, remove all fragments before you resume printing.
3. Open and then close the left door to clear the message.
Clear jams in the duplexer
1. Open the left door.
2. Remove the duplexer by pulling it out with both hands. Set the duplexer aside, upright, on a piece of
paper to prevent spills.
NOTICE: When pulling out the duplexer, avoid making direct contact with the black cylinder to prevent
ink smear on skin or clothes.
ENWW Jams and paper-feed issues 73
To Next Page
Loading...