The product prints slowly
If the product prints, but it seems slow, try the following solutions.
●
Make sure the computer meets the minimum specications for this product. For a list of specications,
visit HP Customer Support .
●
If the paper type setting is not correct for the type of paper you are using, change the setting to the
correct paper type.
●
If your computer or the product is connected to a wireless network, low signal quality or interference
might be delaying print jobs.
●
If Quiet Mode is on, turn it o. This mode slows down the print speed. For more information, see Quiet
Mode.
Improve print quality
You can prevent most print-quality problems by following these guidelines.
●
Check for genuine HP cartridges
●
Use paper that meets HP specications
●
Use the correct paper type setting in the printer driver
●
Use the printer driver that best meets your printing needs
●
Align the printhead
●
Print a print-quality report
Check for genuine HP cartridges
Your cartridge may not be a genuine HP cartridge. For more information, see Counterfeit HP cartridges.
Replace it with a genuine HP cartridge.
Use paper that meets HP specications
Use dierent paper if you are having any of the following problems:
●
The printing is too light or seems faded in areas.
●
Specks of ink are on the printed pages.
●
Ink smears on the printed pages.
●
Printed characters seem misformed.
●
Printed pages are curled.
Always use a paper type and weight that this product supports. In addition, follow these guidelines when
selecting paper:
●
Use paper that is of good quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles,
voids, staples, and curled or bent edges.
●
Use paper that has not been previously printed on.
ENWW Printing issues 79
To Next Page
Loading...