8. Important: Close the locking levers on the left and right hubs.
9. Feed the paper into the appropriate slot: the front slot for the front roll, the rear slot for the rear roll.
TIP: The rear roll may need extra roll-ups to facilitate automatic feeding. Do not stop feeding until the
paper is automatically advanced.
10. Continue feeding until you hear a beep.
11. If the paper edge is not straight and clean, you can cut it o with the appropriate button (there is a
button for each roll in the drawer).
When you press the button, the paper is advanced; when you release the button, the paper is cut.
Remember to remove the cut strip of paper.
12. Close the drawer when you have nished loading rolls into it.
32 Chapter 2 Paper handling ENWW
To Next Page
Loading...