HP Pavilion a6330 Start Here

Connecting Speakers or Microphone 35
To connect digital audio speakers:
1 Turn off the computer.
2 Connect the Digital Out connector on the back panel of your computer to the digital
input (S/PDIF) on digital speakers or a digital audio system.
3 Turn on the computer.
4 Plug in the speaker system power.
5 Turn on the speaker system.
6 After the speakers are connected to the computer, configure the audio software for
sound output for your computer model. See “Configuring Speaker and Sound
Options.”
 Audio card with digital output and type 3 connectors: See “Configuring Audio
Output with Multichannel Sound Manager.” Follow the instructions to enable
digital audio output.
 Audio card with digital output and type 6 connectors: See “Configuring Audio
Output with Sound Effect Manager.” Digital audio output is already enabled as
the default.
 Sound card: See “Configuring Audio Output with a Sound Card.” Follow the
instructions to enable digital audio output.
NOTE:
 Type 3 is three connectors.
 Type 6 is six connectors.
 Type S is sound card.
NOTE: Always turn on the computer before you turn on the speaker system.
3
6
S

HP Pavilion a6330 Specifications

General

Brand	HP
Model	Pavilion a6330
Category	Desktop
Language	English