10. Remove the display bezel (4). The display bezel is available using spare part number
608209-001.
11. If it is necessary to replace the webcam module, lift the webcam from the double-sided tape on
the display back cover (1), disconnect the webcam cable (2) from the module, and remove the
webcam. The webcam is available using spare part number 615744-001.
12. If it is necessary to replace the display panel, remove the four Phillips PM2.0×5.0 screws (1) that
secure the display panel to the display enclosure.
68 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
