Removal and Replacement Procedures
Maintenance and Service Guide 5–7
2. Loosen the two black Phillips PM2.5×5.0 screws 1 that
secure the hard drive cover to the computer.
3. Lift the left side of the cover 2 and swing it to the right.
4. Remove the hard drive cover.
✎
The hard drive cover is included in the Plastics Kits, spare part
number 412384-001 for computer models not sold at Best Buy,
and spare part number 417666-001 for computer models sold
at Best Buy.
Removing the Hard Drive Cover
To Next Page
Loading...
