2–2 Maintenance and Service Guide
Troubleshooting
2. Select the File, Security, Diagnostics, or
System Configuration menu.
3. To close Computer Setup and restart the computer:
❏ Select File > Save changes and exit, and then press enter.
– or –
❏ Select File > Ignore changes and exit, and then
press
enter.
– or –
❏ Select File > Restore defaults, and then press enter.
4. When you are prompted to confirm your action, press
f10.
Selecting from the File Menu
Table 2-1
File Menu
Select To Do This
System Information ■ View identification information about the
computer, processor, memory and cache size,
and system ROM.
■ View BIOS revision, keyboard controller
version, and battery serial number information.
To Next Page
Loading...
