5–36 Maintenance and Service Guide
Removal and Replacement Procedures
19. Remove the Phillips PM2.0×3.0 screw 1 that secures the
display inverter to the display enclosure.
20. Lift the inverter 2 out of the enclosure as far as the display
cable and backlight cables will allow.
21. Disconnect the display 3 and backlight cables 4 from
the inverter.
22. Remove the inverter.
Removing the Display Inverter
Display Assembly Subcomponents
Spare Part Number Information
Display inverter 412345-001
To Next Page
Loading...
