5ā40 Maintenance and Service Guide
Removal and Replacement Procedures
ā
The microphone and cable are included in tthe display
enclosure spare part kits, spare part numbers 412350-001 and
412349-001.
31. If it is necessary to replace the microphone and cable, release
the retention tabs 1 built in to the display enclosure lining
that secure the wireless antenna cables to the display
enclosure.
32. Remove the microphone from the clip 2 in the
display enclosure.
33. Detach the microphone cable 3 from the display enclosure.
Removing the Microphone
Reverse the above procedure to reassemble and install the
display assembly
To Next Page
Loading...
