Removal and Replacement Procedures
Maintenance and Service Guide 5–5
5.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery by following these steps:
a. Turn the computer upside down with the front panel
toward you.
Section Description
# of Screws Removed
5.24 ExpressCard Assembly 4
5.25 Fan/Heat Sink Assembly 5 loosened
5.26 Processor 1 loosened
Disassembly Sequence Chart
(Continued)
Battery Spare Part Number Information
12-cell, 8.8-AHr
6-cell, 4.0-AHr
417067-001
417066-001
To Next Page
Loading...
