Removal and Replacement Procedures
Maintenance and Service Guide 5ā19
3. Disconnect the auxiliary and main antenna cables 1 from the
Mini PCI communications module.
4. Spread the retaining tabs 2 on each side of the Mini PCI
socket to release the Mini PCI communications module. (The
edge of the module opposite the socket rises away from the
computer.)
5. Remove the Mini PCI communications module by pulling the
module away from the socket at a 45-degree angle 3.
ā
Mini PCI communications modules are designed with a
notch 4 to prevent incorrect installation.
Removing a Mini PCI Communications Module
Reverse the above procedure to install a Mini PCI
communications module.
To Next Page
Loading...
