HP Pavilion DV7-6C60 User Manual

6. Insert a new memory module:
CAUTION: To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module.
a. Align the notched edge (1) of the memory module with the tab in the memory module slot.
b. With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module into the memory module slot (2) until it is seated.
c. Gently press the memory module (3) down, applying pressure to both the left and right
edges of the module, until the retention clips snap into place.
CAUTION: To prevent damage to the memory module, be sure that you do not bend the
module.
7. Align the tabs on the cover (1) with the notches on the computer, and then close the cover (2).
8. Replace the battery.
9. Reconnect AC power and external devices to the computer.
10. Turn on the computer.
Adding or replacing memory modules 71

HP Pavilion DV7-6C60 Specifications

General

Brand	HP
Model	Pavilion DV7-6C60
Category	Laptop
Language	English