EasyManuals Logo

HP Pavilion Gaming 15 User Manual

HP Pavilion Gaming 15
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
EL-MF877-00 Page 2
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Item Description Notes
Quantity of
items
included in
product
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
screw driver
#1
tear down stick
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Remove base screws 7pcs
2. Disassemble base cover from the unit.(rear side use tear down stick)
3. Take off 4 pcs of screws which fastening battery to Top_assy. and then disassembly the Battery.
4. Remove HDD and HDD cable.(3 screws)
5. Remove KB BL FPC, KB MEM, TP FFC, LCD cable's MB side, Antenna cable's MB side, DB to MB FFC, speaker
cable.
6. Remove 2 pcs of screws and disassemble DB.
7. Remove 8 pcs of screws and disassemble thermal module.
8. Losse 5pcs screws and remove fan cables and 2 fans.
9. Remove 1 pcs screw and disassemble Wlan module from MB.
10. Remove 1 pcs screw and disassemble SSD module from MB.
11. Remove RAM module from MB.
12. Remove DC -in cable, DB to MB FFC from MB.
13. Loose 5pcs screws whiching fastening MB on top_assy and take MB off from top-assy.
14. Remove 2 pcs screw and Disassemble speaker R and L from top-assy.
15. Loose 3pcs screws whiching fastening TP support on top-assy and take off TP support BKT from top-assy.
16. Loose 3pcs screws whiching fastening TP and TP holder assy and take this assy from top-assy.
17. Remove 6pcs of screws and disassemble the display unit from top-assy.(The LCD must open to max angle for
disassemble)
18. Disassemble LCD bezel from display unit.
19. Tear off the 2 pcs reworkable tape from LCD upper side. and take it off from LCD cover. Before removing LCD
module, separate LCD cable from LCD module.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Pavilion Gaming 15 and is the answer not in the manual?

HP Pavilion Gaming 15 Specifications

General IconGeneral
GraphicsNVIDIA GeForce GTX 1650
Display15.6-inch FHD (1920 x 1080) IPS
RAM8GB / 16GB DDR4
Storage256 GB / 512 GB / 1 TB SSD
Operating SystemWindows 10 Home
Battery3-cell, 52.5 Wh Li-ion
AudioDual speakers
Ports1 x HDMI, 1 x RJ-45, 1 x headphone/microphone combo
WirelessBluetooth 5.0
ProcessorIntel Core i5 / AMD Ryzen 5

Related product manuals