6 Modem Command Guidelines
Modem Command Guidelines
Creating a Command Mode Shortcut Icon
You can create a Windows shortcut icon for accessing
HyperTerminal in online command mode. To place a Command
shortcut icon on the Windows desktop:
1. Create a Command icon in HyperTerminal.
✎
To access HyperTerminal:
■ In Windows XP Professional, select Start > All
Programs > Accessories > Communications >
HyperTerminal.
■ In Windows 2000 Professional, select Start > Programs >
Accessories > Communications > HyperTerminal.
a. In the Name field, type:
Command
b. Select OK. (The Connect To dialog box is displayed.)
c. In the Connect Using field, select the COM port used by
your modem.
✎
To identify the COM port used by your modem:
■ In Windows XP Professional, select Start > Control
Panel > Printers and Other Hardware icon > Phone and
Modem Options icon > Modems tab.
■ In Windows 2000 Professional, select Start > Settings >
Control Panel > Phone and Modem Options > Modems.
d. Select OK. (The Port Settings tab is displayed.)
e. Select OK. (The command mode screen is displayed with
a flashing cursor in the upper left corner. The modem can
now receive a command and respond to the command
with a result code.)
316740-002.book Page 6 Thursday, May 1, 2003 1:40 PM
To Next Page
Loading...
Need help?
General