HP Pavilion ZE2000 User Manual

1–4 Hardware and Software Guide
Hardware
Power Controls
Component Description
1
Display switch* If the notebook is closed while on, initiates
standby.
2 Power/standby button* When the notebook is
■ Off, press to turn on the notebook.
■ On, briefly press to initiate hibernation.
■ In standby, briefly press to resume from
standby.
■ In hibernation, briefly press to restore
from hibernation.
✎
If the system has stopped responding
and Windows shutdown procedures
cannot be used, press and hold for at
least 4 seconds to turn off the
notebook.
*This table describes default settings. For information about changing the
function of the display switch or power/standby button, refer to the “Setting
Other Power Preferences” section in Chapter 3, “Power.”

HP Pavilion ZE2000 Specifications

General

Processor	Intel Celeron M or Intel Pentium M
Operating System	Windows XP Home or Professional
RAM	Up to 2GB DDR
Graphics	Intel Graphics Media Accelerator 900
Optical Drive	DVD/CD-RW combo or DVD±RW
Battery	6-cell Lithium-Ion
Networking	10/100 Ethernet, 56K modem, optional 802.11b/g Wi-Fi
Ports	3 USB 2.0, VGA, S-Video, headphone, microphone, RJ-11, RJ-45