5–30 Maintenance and Service Guide
Removal and Replacement Procedures
✎
Carefully clean any thermal paste residue from the heat sink 1
and processor surfaces 2 each time you remove the heat sink.
Apply new thermal paste to both surfaces.
Thermal paste is included with the replacement heat sink and is
also available in the Thermal Paste Kit, spare part number
346178-001.
Removing the Thermal Paste From the Heat Sink and Processor
Reverse the above procedure to install the heat sink.
333621-001.book Page 30 Wednesday, September 17, 2003 12:24 PM
To Next Page
Loading...
