5–10 Maintenance and Service Guide
Removal and Replacement Procedures
5.6 Mini PCI Communications Board
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the memory expansion/Mini PCI communications
compartment cover (Section 5.5).
3. Disconnect the two antenna cables 1 and 2 from the Mini
PCI communications board.
4. Spread the retaining tabs 3 that secure the Mini PCI
communications board to the socket. The board rises up.
5. Pull the board away from the socket at a 45-degree angle 4.
Removing a Mini PCI Communications Board
Reverse the above procedure to install a Mini PCI
communications board.
Spare Part Number Information
Mini PCI 802.11b wireless LAN
Mini PCI 802.11g wireless LAN
344864-001
344863-001
333621-001.book Page 10 Wednesday, September 17, 2003 12:24 PM
To Next Page
Loading...
